HANDY CALIBRATOR CA150
Signal source:DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
Measurement:DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
Features:Highly accurate within 0.02% of the DC voltage range for source and
Source and measurement can be performed simultaneously.
Vertical type with large-screen display.Loop power supply function
(24 VDC at a load of up to 22 mA)
It is possible to measure current in the mA range while supplying
Sweep functions that allow 3 types of continuous outputs.
Options:94010 AC adapter, 94015 NiMH Battery, 93027: Main Body case with
Specifications - Model CA150
|Power Supply||6 AA size alkaline batteries|
AC adapter (sold separately)
AC adapter specification: 100 to 240 VAC, 50/60 Hz, 1.4 A
Dedicated NiMH battery (sold separately)
OUTPUT: 12 VDC, 3 A
|Auto power-off||Approx. 10 minutes; it can be canceled by setting.|
|Operating Temperature/Humidity Range||0 to 40°C, 20 to 80 % RH (no condensation)|
|Storage Temperature Range||-20 to 60°C 90%RH or less (no condensation)|
|External Dimensions||251 x 124 x 70 mm|
|Weight||Approx. 1000 g|
|Conforming Standards Safety||Softy EN61010-1|
EMC EN 61326 Class B;EN 55011 Class B Group1
EN 61000-3-2; EN 61000-3-3, EN61326
|Vertical Hand-Held Calibrator||Easy-to-hold vertical body is designed to make it intuitively easy
to operate, as individual functions are accessed directly by
pressing assigned keys.|
Using the main body case (model No. 93027) (sold separately), you
can hang CA150 to your body or a handrail to keep it handy.
|Simultaneous Source and Measurement for Process Devices||In conventional calibration applications, multiple devices such as
a standard generator, dial resistor and multi-meter were required.
Now with a single CA150 unit, it is possible to perform operation
check at regular inspection and maintenance of thermocouples, RTDs
and instruments, as well as maintenance and equipment diagnosis of
process devices such as transmitters, thermostats and signal
|Loop Power Supply Function||It is possible to measure generated current signals while supplying
loop power 24 VDC from a two-wire type transmitter (up to 22 mADC).|
|Highly Accurate and Multi-Functional Source and Measurement||High accuracy: 0.02% for the source unit and 0.02% for the
Source and Measurement functions: DCV voltage, DC mA, ohm,
frequency and temperature (thermocouple, RTD) and 24 VDC power
supply function for transmitters
|Output Functions||Automatic Output Functions|
- Step sweep function
This function changes the output in a staircase (step) pattern at
- Linear sweep function
This function increases (or decreases) the output linearly with
respect to the generated value.
- Program sweep function
This function outputs source setting values stored by the data
memory function sequentially in the order they are stored in the
|Communication Functions||Serial interface RS232 D-Sub 9-pin connector|
|Memory Function||Data can be stored and loaded in setting memory (setting data) and
data memory (source/measurement).|
- Setting memory
This function saves/loads setting conditions.
Up to 21 data items can be stored. Settings for
(source/measurement) functions, ranges, generated values/measured
values as well as setting mode conditions can be stored.
- Data memory
This function saves source and measure values displayed.
Up to 100 data items can be stored. Storage date/time,
(source/measurement) functions, ranges and generated
values/measured values can be stored. Stored data can be checked on
the display of the main unit as well as via communication.